You want the best for your deck in care, protection, and aesthetics. Washing seems like a no-brainer to maintain it, so why not make your job easier with the power of a pressure washer? Here are 5 reasons we don’t pressure wash decks in our business, and why we think you shouldn’t pressure wash your deck either.

NOTE: We focus on the maintenance and care of wood decks and do not recommend pressure washing any of them (Cedar, Ipe, Accoya, Kebony, Thermory Ash, etc.) Pressure washing may be perfectly fine for your composite or PVC deck.

Your deck turned out beautifully. You’ve made memories with your family, hosted gatherings, dined friends, and appreciated a quiet place to escape with a book. You followed the Sand & Stain System to prep and finish your deck. Only that was last year. Maybe even two years ago…

So how do you keep your deck looking fresh and properly protected without pulling out the sanders or hiring contractors every year?

We’ll show you exactly how to get the most out of your deck for as long as possible before sanding again with no blistering, cracking, chipping, or peeling. Guaranteed.

The deck has been fully been prepped. Sanding is complete, and so the only thing left to do is the most satisfying step: finishing with your colour of choice for protection, and that undeniable beauty that only a true penetrating oil stain can provide.

There are a few different ways you can tackle this. To save you time, here is how we recommend doing this, and how we have served happy clients for years in our own business. This is is especially important to know, because you’ll be able to get away with stain reapplications without sanding again for years (perhaps forever) using the these tools, techniques, and products.

NOTE: The process for finish staining pressure treated wood is the as staining cedar—however, the prep is very different. If you have pressure treated wood, check out our post 5 Reasons You Should Never Sand Pressure Treated Wood here to make sure you do it right the first time.

You’ve got pressure treated wood and you want to maintain so it lasts and looks its best in the process. You may have heard or read in our articles that sanding prep work is essential before staining, sealing, or finishing a deck.

This is true to remove mill sheen on new cedar lumber, removing peeling stain from a deck, or periodically (after several years or re-coats with a penetrating oil) to restore it before staining it again. The exception to this is: pressure treated lumber.

Here are five reasons reasons you should never sand your pressure treated wood…